info@aspraengineering.in
1. To have common breather system across the driveline aggregate, and platform. 2. To achieve Economies Of Scale (ESO). 3. To reduce water or foreign particle PPM level in oil pool in dynamic. 4. No oil expulsion in normal running. 5. No oil expulsion when vehicle settles upside down after meeting an accident. 6. To increase oil drain period. 7. To ease the ordering & logistics intricacy today present in system. 8 To achieve long term Fit & Forget solution for breather. 9. To enhance aggregate oil seal as well as oil drain life.
1. PRODUCTION:
Automation of assembly line, through robotic application replacing manual fitting of current venting system of nipple, pipe, clamp, clip is bound to improve capacity utilization of the facility and increase production.
2. PRODUCTIVITY :
Reduced manpower on the assembly line, logistics such as inventory, warranty claim, servicing, storage etc. will reflect substantially in productivity.
3. PROFIT :
Reduced cost on Human Resources, reduced capital employed, increased capacity utilization, increased sales due to more customer’s satisfaction, is bound to reflect in the balance sheet, favorably.
4. SAFETY :
a) Directly, eliminating chances of expelled oil coming in contact with some hot part of the vehicle (after it settles upside down after meeting an accident), resulting in appearance of flame, while passengers are trapped inside the vehicle . b) Indirectly, causing slippery surface around accident site with obvious dangers. c) No oil vapour in the air and no spilled oil on road and discarded oil at regular interval, protects our environment and thus prevents health hazard to the habitats of this globe.
5. Customer’s Benefits :
a) Burden of frequent oil change, repair of Gearbox / Axle, oil seals will go a long way. Benefitting the customers perennially, through the life of the vehicle. b) Smooth drive as viscosity of lubricant is maintained. c)Improved mileage as sluggishness due to contamination of lubricant eliminated. d) Hassle free drive in flooded road condition as no water ingestion, on emulsion , no foaming out of lubricant , stalling the vehicles midway. e) No plugging of vent due to S.P.M of air and resultant damage to oil seals on the axle etc. (Breathing out of oil vapour and Breathing in of S.P.M laided air clog the nipples).
6. ENVIRONMENT :
a) Prevents oil vapour expulsion and air Pollution. b) Prevents oil spillage in normal running condition and even in case of an accident. c) Burden of discarded oil at regular interval, is eliminated. d) Reduced / eliminated breakdown of Gearbox / Axle reduces exploitation of Mother Earth’s resources.
LIKE SEALED BEARINGS, WHICH DOES NOT NEED REGULAR GREASING, GEAR BOX / AXLE FITTED WITH ASPRA BREATHERS IS PROTECTED FOR LIFE TIME, ELIMINATING NECESSITY OF REGULAR OIL CHANGE.
+919711151781,83.
